Limelight on Historic Brownstone Restoration – Alfred’s Victorian

Alfred’s Victorian Restoration Story –  with Andy deGruchy

Alfred's Victorian Staff
Alfred’s Victorian Staff

 

This beautiful late 19th century Hummelstown brownstone was recently restored by deGruchy Masonry Restoration, the Technical Install/Training Team of LimeWorks.us. Using historically appropriate, breathable Natural Hydraulic Lime based materials for repointing the brickwork and repairing the brownstone, this iconic building is now put into an excellent state of conservation. It remains a testament to excellent stewardship of our built heritage thanks to the owner, and lifelong resident of Middletown, PA, Robin Pellegrini.

Taking an architectural conservator’s approach, the team of masons repaired the broken and missing pieces of historic sandstone and lime mortar with environmentally friendly Ecologic® Mortar and Lithomex Brick and Stone repair material. The team retained as much of the historic fabric as possible by repairing what could be salvaged with these specialty materials. These materials allow the building envelope to process water out naturally through the lime and sandstone because of their effective liquid/vapor transfer properties over any patch material based on Portland cement.

Please take a look at our other videos for the full extent of this remarkable restoration:

True Sustainable Development in Historic Restoration  – Alfred’s Victorian –  Randy Ruth

Restoring Historic Alfred’s Victorian Brownstone  –  Randy Ruth

Natural Hydraulic Lime Mortars for Historic Preservation and Their Impact on the Environment –  Randy Ruth

 

Presented by LimeWorks.us
Phone: 215-536-6706

LimeWorks.us (FaceBook : Google+ : LinkedIn : Twitter : YouTube)

Repairing Broken and Damaged Stone and Brick using Lithomex – FAQ by Randy Ruth

by Randy Ruth

Randy-doing-Lithomex

Of course following the Lithomex technical data sheet is important to ensure a quality application, but what about the little things that can’t fit on one sheet of paper?  The small details that help make good finish “POP” into a quality indistinguishable patch. There are many things that are far to subtitle to translate onto paper from experience and feel of mortar and trowel. So practice, timing and tools are critical overview subjects to be discussed here.

Practicing patching old single salmon bricks not in a wall is a cheap and technically challenging exercise. The porosity of salmon bricks demonstrates the importance of controlling suction. If suction is not controlled, bond failure can occur while detailing outside corners. It’s these corners that give rise to the technical challenge. By coating multiple sides of a brick, it helps create focus on multiple surface planes. The initial reshaping step doesn’t have to be perfect. It just has to have about 1/8 inch extra material beyond the desired finish. Once Lithomex is well bonded to three sides of a brick, wait for the material to stiffen to thumbprint hard.

DSC_0126Re-troweling the surface will compact the patch to compensate for any slight shrinkage. While using trowels, squares, straight edges, miter rods and improvised tools to shave back and cut away undesired material to the finished profile will create the rough finish. When finishing a masonry unit in a wall, long metal straight edges are great to use as a profiling tool. With the edges exposed over to adjacent units or edges, they act as a guide to bring the finish to proper plane. Typically much of this profiling can be done in the first day of patching; however 12-24 hours later more intricate detailing and carving can be done. Tooth chisels can be used during this time frame to scratch in tooth marks or crandled finishes.

photo-e1328884464676

As more time is allowed to let the patch “firm up” stone masons chisels can be used in a traditional method to give more authentic characteristics. Sanders and rubbing block are also useful for honing the surface to a more polished or pristine finish.

Following these tips and practicing will build upon previous experiences for the craftsman or aspiring novice, facilitating a better rounded approach to brick, stone and terracotta patching.

Other Examples in Use:

 



Presented by LimeWorks.us

Phone: 245-536-6706

LimeWorks.us (FaceBook : Google+ : LinkedIn : Twitter : YouTube)

“Deteriorating Brownstones – FAQ by Randy Ruth”

by Randy Ruth

Q: I have an old brownstone house and some of the stone have been falling off, what can I do to prevent further damage and fix the damage that has already occurred?

A:  When you have brownstone deterioration or any form of stone deterioration and want it to stop, you have to first identify the root cause. Sometimes it’s as simple as replacing downspouts or replacing roof flashing, to prevent further damage to the stone. Other times it can be a long complicated series of tests and empirical analysis. Depending on the cause of the deterioration of the brownstone, a number of solutions can be applied.

If the stone is only sugaring or sanding with light deterioration, then perhaps doing nothing for a maybe a year and watching the stone for further deterioration is sufficient. However, if the stone is in much worse shape with possibly a ¼ inch or more of stone loss, then some could be some very serious problems with the integrity of the stone.

Brownstone as with many different types of sandstone has bedding planes. These bedding planes in the stone tend to detach from one and other depending on how the stone was laid in the wall. Imagine a layered cake as the stone, with each layer on top of one and other. If the stone cake is put on its side there is a greater chance that moisture can get between the layers and cause delimitation and or exfoliation. This being a common problem associated with sandstone, a more detailed resource for classifying the type of stone loss you may have can be found here.

It is always recommended that when fixing damage to stone that a qualified professional be brought out to see what the damage is and come up with an appropriate course of action. There are many different ways to approach fixing a stone like whether consolidation is appropriate is an appropriate first step or not. In my eyes, it is always best to honor the original detail of the stone and artisan who created it by only fixing what is broken. When patching stonework an important approach is to make sure that appropriate sympathetic patching materials are used. (Lithomex) The use of impermeable materials can cause further deterioration of the stone by trapping moisture. This will result in a faulty patch that can accelerate deterioration to the adjacent stone.

Brownstone with Water damage

Brownstone Before

 Brownstone Repaired with Lithomex

Brownstone After

LimeWorks.us

Phone: 245-536-6706

LimeWorks.us (FaceBook : Google+ : LinkedIn : Twitter : YouTube)