Total Repointing, FAQ Friday

noname-1



Q: What is the correct method for total repointing?

A: Correct total repointing requires removing the joint to a depth of approximately 2-1/2 times its width and then using a compatible mortar in relation to the final p.s.i. and both the liquid and vapor transmission rate as that of the remaining joint and brick. High lime content pointing mortar is compatible with the soft and absorptive nature of historic brick which rely on their “fired skin” to protect themselves and the building from rain intrusion. If high concentrations of Portland cement were in the repointing mortar instead of lime, when moisture in the brick were to expand and contract during freeze/thaw cycles, often the unyielding mortar forces the softer face of the brick to exfoliate thus leaving a vulnerable unburned “salmon” center of the brick exposed to the elements.

LimeWorks.us (Linked-in : Facebook : Twitter)