Product Details
Product Description:
Ecologic™ Potassium Silicate Paint is a highly durable interior & exterior silicate dispersion paint. Potassium Silicate Paint achieves its durability by chemically bonding to the substrate and maintaining a high vapor permeability. The paint bonds by penetrating the porous substrate and curing through the petrification of the quartz binder. Along with its durability and longevity, the paint is non-combustible, fire retardant, washable, mildew resistant, and water repellent.
Properties of Potassium Silicate Paint
Mineral paints and stains chemically bond to all forms of masonry substrates such as brick, stone, mortar, stucco, and cement. Unlike latex paints, they are non-film-forming which creates a permanent bond that works in harmony with the masonry.
Potassium Silicate Paint is a thick-bodied masonry paint that is typically applied in 1-2 coats and dries with an opaque, matte finish obscuring the texture of the substrate.
Where to use it
Ecologic™ Potassium Silicate Dispersion Paint can be used on most rigid and absorbent exterior and interior wall surfaces. Ideal are mineral-based surfaces such as concrete, lime & cement plaster (stucco), brick, stone, or old powdery stucco if it has been solidified by a mineralizing coat of Ecologic™ Waterglass Primer & Consolidant.
Application
Stir well before using. Do not apply @ working temperatures (surface + air) below 41ºF (5ºC) or above 113ºF (45ºC). Apply 2 coats by brush, roller, or airless sprayer after proper surface preparation. Final coat to be applied continuously wet-in-wet especially when using stronger tinted colors. Ideally to be sprayed.
General Preparation
Surfaces must be rigid & absorbent, dry, clean, and free of dust, oily residues and chemically neutral or alkaline. Old coats of latex or alkyd paints must be removed, since they inhibit penetration of the silicate binder into the substrate and vapor-permeability. Flaking or peeling paints must be removed completely.
Carefully protect all adjacent glass, metal, ceramic, etc against splatters. Remove unavoidable splatters immediately with water.
Disclaimer
These products must not freeze during warehousing or transport and may limit availability during certain times of the year. Please call for availability.
Ecologic™ Potassium Silicate Paint Coverage
Approx. 300 – 320 sq ft. per gallon (varies with surface material, texture, and pre-treatment).
Potassium Silicate Paint Color Samples
Potassium Silicate Paint comes in 13 stock colors (marked by the 100% full tone colors) and hundreds of designer colors. You can download the color pdf here or view the samples below: Ecologic Potassium Silicate and Colorwash Stain 2021 Colors
Custom Paint Colors
An engineered custom simulation can be produced by us to simulate the color of your sample. Color simulations can be conducted with old paint samples or color swatches from Benjamin Moore or Sherman Williams.
Check out our quick reference Mineral Paint Comparison Chart to learn more about the main differences between our Ecologic LimeWash Platinum, Ecologic Potassium Silicate Paint, Ecologic Colorwash Stain, and our Saint-Astier Lime Paint.
Frequently Bought Together
Ecologic™ PLASTER TOPCOAT™ Platinum
$15.00 – $55.00
Saint-Astier® Lithomex®
$40.00 – $200.00
Goes a long way & is easy to apply.
I mixed some of this paint with the water glass to extend the coverage and half the pint did a very nice job covering the walls in the back room of the basement. Pics included are a half-painted wall (white is the cleaned/patched/painted side), and a before/after of the wall before priming with waterglass and a tiny amount of the paint just to tint it barely white. The final coat on the wall turned it totally opaque and it looks WAAAY less filthy than it did before (it covered drips, stains, etc with ease).
Fantastic product! Fast shipping. Very happy.
Representative I spoke to on the phone was very helpful and courteous.