A mildew resistant and water repellent, highly durable and breathable mineral-based exterior silicate wall paint.
Potassium Silicate Paint must not freeze during warehousing or transport and may limit availability during certain times of the year. Please call for availability.
Mineral paints and stains chemically bond to all forms of masonry substrates such as brick, stone, mortar, stucco, and cement. Unlike latex paints, they are non-film-forming which creates a permeant bond that works in harmony with the masonry. Potassium Silicate Paint is a thick-bodied masonry paint. Color Wash Stain, however, is a translucent potassium silicate stain that allows the masonry texture to come through the finish. Both can be brushed, rolled or sprayed on. For artistic expressions or when feathering colors with Color Wash Stain a sponge may be appropriate for a unique finish.
Color variations available:
Disclaimer: The above images are for representation and comparison only. Due to different variables, such as computer screen resolution and color settings, the colors may vary when seen on-site. Please use this selection as a guide only.
Suggested Supplement – Ecologic™ Waterglass
Old Exterior Lime & Cement, Stucco, and highly absorbent Mineral Surfaces
Remove loose particles, solidify remaining semi-loose mineral particles from mortar plaster, adobe,
concrete, or unglazed bricks with 1 – 2 coats (as needed) of Ecologic™ Waterglass straight or with a 1st
coat prepared out of Ecologic™ Potassium Silicate Paint and up to 20% Ecologic™ Waterglass.
New Exterior Concrete, Mortar, Stucco, etc.
Make sure surfaces are fully cured, i.e. min. 30 days old at time of painting. Remove or neutralize any
oily residues such as forms, release agents, etc.
Apply 1 Primer coat of Ecologic™ Potassium Silicate Paint diluted with 10% Ecologic™ Waterglass
plus two coats of Ecologic™ Potassium Silicate Paint.