Mortar, Brick, and Stone Simulations
Ordering a Custom Formulated Simulation

An engineered custom simulation can be produced by us to simulate the color and texture of your sample to help you carry out your application to restore, refurbish, or create something new. Color simulations can be carried out for mortar, stone, brick, terracotta, plaster, stucco, and mineral paints.

Slider

Examples of Custom Simulation Requests to reproduce Color, Texture and Composition of Historic Materials

Mortar, Brick, and Stone Simulations

Color Simulations for Mortar, Brick, and Stone:

  1. One cured tile
  2. (approximately) 2 lbs of sample mix for mock-up and sample installation purposes for verification.
  3. Upon approval of the custom blend orders can be made in quantities of a quart, gallon or 5 gallons.

Cost is $150

For Mineral Paint Simulations:

  1. Send us a paint store color card or call us with the color code.
Follow Steps 1-3

How to Submit Your Sample for Mortar, Brick, and Stone Simulations

Brick Mortar Sample
1.

Collect A Good Representative Sample

Take an intact thumb size sample from the existing mortar, plaster, stucco, brick, stone, or mineral paint. If it is possible, create a circle around the area you want simulated using a permanant marker.

Custom Simulation Checklist
2.

Fill Out The Form

When mailing a sample please fill out and include the following form.  If you would like to include photographs or other supporting documents they can be sent to support@limeworks.us.

Shipping your sample
3.

Mail The Form And Sample To LimeWorks.us

Place your sample inside a ziplock bag, write the project name, your name, and phone number on the bag. Ship the package to 3145 State Road, Telford, PA 18969.

observation of your sample and consultation
4.

Get A Call Back From LimeWorks.us

When we receive your sample we will call you back at no cost to discuss the application and what your options are to receive further services.