InStrip

Nonhazardous Interior and Exterior Stripping Agent

InStrip is a paste-type multi-layer, interior and exterior paint stripper that can lift primers, solvent and water-based paints. The product also removes various wood finishes, such as varnish, shellac and stains. Works great on wood, and will not raise the grain.

Coverage rates with InStrip will vary from 25-100 sq. ft. per gallon depending on the thickness of application.

• Non-toxic and non-corrosive
• Low VOC
• Low odor
• Will not fuzz or discolor hard and soft wood
• Suitable for furniture stripping
• Has a wide range of applications
• Paste clings on vertical surfaces
• pH Neutral

1. Apply InStrip with a brush or a roller to a dry surface.
2. Allow the proper dwell time determined by pretesting.
3. Wipe off, scrape off, or rinse off using high pressure. Do not use pressure that marks the surface.

Note: textured surfaces may require a second coat of InStrip. Pre-testing will determine this.

Rinse all residue from the surface.
When in doubt, follow the manufacturers recommended P.S.I. for the substrates.
Do not use a zero-degree nozzle.

InStrip Product Spec Sheet

Instrip Safety Data Sheet